Vol. 168 No. A5(S) (2026): Integrating Innovation Across Disciplines New Paradigms in Multidisciplinary Research | International Journal of Maritime Engineering

DOI: https://doi.org/10.5750/ijme.v168iA5(S)

Published: 2026-10-21

Hybrid Thermodynamic and Machine Learning Approach for Performance Prediction and Optimisation of Gas Turbine Engines

S S Rathore, Shivam Mishra, Diksha Aggarwal, Mandeep Kaur, Tanya Singh

1-14

PDF

Tribological and Microstructural Characterization of LPBF-Fabricated AlSi10Mg Composites with B₄C Reinforcement

S Dhull, S Kumar, J Raj, R Mishra, N Kulkarni

15-24

PDF

Development of Mxene-Reinforced AA5083 H111 Marine Aluminium Composites: Experimental Investigation, Hollomon Constitutive Modeling and Finite Element Validation Introduction

Ambuj Saxena, Yogesh Dinkar Jadhav, Praveen Pachauri, Mukesh Kumar, Tanveer Ahmad Wani, Preeti Pandurang Kale

25-32

PDF

Effect of Reinforcement Weight Fraction on the Mechanical and Tribological Performance of AA7075-T6 Based Metal Matrix Composites for Marine Bearing Applications

Tarun Kumar Gupta, Amit Kumar, Praveen Pachauri, Bipin Sule, Tanveer Ahmad Wani, Rakesh Prasad

33-42

PDF

AI-Assisted Modelling and Parameter Optimization for Hot-Press Joining of Aluminium–Polymer Hybrid Structures via RSM, ANN, and GA

Dufera Bulto Gonfa, Devendra Kumar Sinha, Pooja Singh, Subhash Mishra, Shri Bhagwan, Shankar Kumar

43-56

PDF

Optimization of Process Parameters of Taper Cutting by WEDM Process of Al-SiC-ZrO2 Composite

Brajesh Kumar Lodhi, Dharmin M. Patel, Pradip V. Savalia, Rohit Sahu, Premananda Pradhan, Deepak Gupta

57-68

PDF

Experimental Investigation of the Mechanical Properties and Microstructure of Selective Laser Melted Ti-6Al-4V/TiC Composite

S. Kumar, A P Singh, S Selvarajan, S Agarwal, M Gor, N K Maurya

69-82

PDF

Design and Simulation of Cold Metal Transfer (CMT) Based WAAM Samples of Titanium Alloys for Process Optimization

Dhruv Kumar, Vipin, Reeta Wattal

83-94

PDF

Experimental Investigations of Thermal, Chemical and Water Absorption Analysis of Filler and Fiber Based Composites for Marine Applications

Vijay Chaudhary, Harshu Kumar, Anurag Sunil Menon, Papil M. Gautam, Rohit Sahu, A Bhargavi Haripriya

95-102

PDF

Modeling and Optimization of Electrical Discharge Machining Parameters for Titanium Alloy Using Copper Electrode

S Dhull, Sunil Kumar M, A P Singh, Vikash Kumar, Manisha Sagar Pawar

103-112

PDF

Thermo-Mechanical Behavior and Strain Hardening Characteristics of Functionally Graded Carbon/Glass Fiber Hybrid Composite Leaf Spring Plate

Ranjeet Kumar Singh, Bharat Singh Yadav, S.P. Venkatesan, Maharshikumar B. Shukla, Shobhit Goyal, Anoop Dev

113-122

PDF

Thermodynamic and Sensitivity Analysis of Internal Convection Blade Cooled Gas Turbine Cycle: Effect of Radiative Heat Transfer on Blade Coolant Requirements

Shivam Mishra, S S Rathore, Dinesh Goyal, Mandeep Kaur, Subramanian Karthick, Dr Preeti Pandurang Kale

123-134

PDF

Consequence of Low Volume Reinforcement of Nano Silicon Dioxide on Tensile Property and Morphology of Epoxy Composite

Vijay Verma, Trapti Sharma, Ashwini Kumar, Ganesh Dongre, Manoj Narwariya, Sandeep Singh

135-142

PDF

Analyzing Mild Steel Surface Process Parameters Using Friction Stir Processing

Anant Bhardwaj, Kroviddi Srinivas, S. Lakshmi Sankar, Sorabh Sharma, Manoj A. Vora, Nagireddy Mounika

143-150

PDF

Temperature-Dependent Indentation Behavior of AZ91-Based Composites: An ECM–FPM Comparative Study of Constraint Factor and Pile-Up

Ambuj Saxena, Swetarani Biswal, Frederick Sidney Correa, Anupam Kumari, Shubhi Goyal, Bodireddy Vamalatha

151-160

PDF

Optimization of Stirrer Geometry and Casting Parameters for Fabricating Al-Si Composites

B. Seshavenkat Naidu, Krovvidi Srinivas, Himanshu Makhija, Manoj A. Vora, Anisha Chaudhary, Putta Chandana

161-170

PDF

Dynamic Tensile Properties of Dyneema HB-50 Composite at High Strain Rates Using Split Hopkinson Tension Bar

Arunesh Srivastava, Abhishek Pandey, Shivangi Gupta, Pramod Reddy, Simran Kalra, Praharsh Kumar B. Raj

171-178

PDF

Finite Element Investigation of Harmonic Response in Laminated Skew Plates with Variable Circular Cut-Outs for Marine Structural Components

Manoj Narwariya, Trapti Sharma, Rakesh Prasad, Jaskirat Singh, Maharshikumar B. Shukla, Prakhar Goyal

179-192

PDF

Explicit Lambert W-Function Reformulation and Improved Harris Hawks Optimization for Robust Photovoltaic Parameter Identification

Urmila Sheoran, M. Rizwan, Uma Nangia

193-204

PDF

Hybrid Waste SAC-DPF Ash Reinforced Aluminium Composites: Linking Processing, Structure and Performance

Shailendra Kumar Verma, Pankaj Kumar Chauhan, Jayant Raj, Rashmi Mishra, Bharat Singh Yadav, Kishan Pal Singh

205-216

PDF

Stimuli-Responsive Epoxy Coatings with pH-Triggered Self-Healing for Long-Term Marine Corrosion Protection

Vikramsinha V. Mane, Vratraj K Joshi, Ranganathaswamy M K, Elangovan Muniyandy, Shahbaz Juneja

217-230

PDF

Development of Smart Self-Healing Polymer Composites for Durable Offshore Marine Structural Protection Under Seawater Exposure

Prasad M. Patare, Harjot Singh Gill, Elangovan Muniyandy, Mukesh Didwania, Akanksha Mishra

231-242

PDF

Systematic Evaluation of Abrasive Wear Resistance in Smart Cermet Marine Coatings for High-Speed Pump Impellers

Rohit P. Jadhav, Amol D. Wable, Ramachandran Thulasiram, Ripendeep Singh, Nishant Kulkarni

243-252

PDF

Physics Informed Neural Network Model for Sustainable Marine Material Degradation Prediction Under Multiphysical Ocean Conditions

Ranganathaswamy M K, Girish A. Kashid, Abhijeet Deshpande, Swamynathan S M

253-262

PDF

Smart Mxene Enabled Marine Composite Materials for Structural Health Monitoring of Offshore Engineering Systems

Harjot Singh Gill, Prashant Vijay Thokal, Veera Manikandan, Avinash Somatkar

263-272

PDF

Transfer Learning Based Mechanical Reliability Prediction of Smart Sustainable Marine Composite Materials Under Cyclic Loading

R. A. Kapgate, Mahesh Bhong, Pankaj Tripathi, Ganesh Dongre

273-282

PDF

Submissions

To make a Submission to IJME, click here

Subscriptions

To Subscribe to IJME, Click Here for Subscription Options

Information

Join the Royal Institution of Naval Architects

The University of Buckingham Press is delighted to partner with RINA on the publication of IJME. RINA is a global membership body for the maritime industry and has Members in 140 countries. To see the options of becoming a Member at RINA, click here

UBP Journal Policies

Peer Review

Once articles are accepted to peer-review, all articles must be blind peer reviewed by at least two reviewers. Each reviewer will submit their review including comments and a recommendation when to accept for publication, reject or to request revisions to the articles.

Respect for Participants:

All Journals will treat all individuals involved in research with dignity and respect..

Informed Consent:

Authors must obtain and document informed consent from participants, ensuring they understand the research purpose, procedures, and potential risks.

Data Protection and Confidentiality:

See University of Buckingham’s Press’ Data Protection Policy.

Conflict of Interest Disclosure:

Authors are required to disclose any potential conflicts of interest, including financial or personal relationships that might influence their research or its interpretation.

Authorship and Attribution:

All individuals who made substantial contributions to the research must be acknowledged and those listed as authors must have approved the final text.

Data Integrity and Reporting:

Authors must accurately present their research findings, avoid fabrication or falsification of data, and provide sufficient detail for replication.

Plagiarism:

Journals should confirm they are using established plagiarism software, ensuring that submitted work is original and appropriately cites sources.

Ethical Approval:

For research involving human or animal subjects, it is required that confirmation that ethical approval was obtained from relevant institutional review boards or ethics committees.

Scientific Misconduct:

Any suspected scientific misconduct, such as fabrication, falsification, or plagiarism, must be immediately reported to the Publisher by emailing info@unibuckinghampress.com

Articles