A Study on the Series Inductance Simulator Using Single CFOA

Ajishek Raj; Garima; K L Pushkar; Manoj Kumar

doi:10.5750/ijme.v168iA4(S).1900

PDF (GBP 29.99)

Published: Oct 10, 2026

DOI: https://doi.org/10.5750/ijme.v168iA4(S).1900

Keywords:

Inductor simulator CFOA Lead compensator Lag compensator LPF

Ajishek Raj

Electrical Engineering Department, National Institute of Technology Patna, Bihar, India

Garima

Electrical Engineering Department, Delhi Technological University, Delhi, India

K L Pushkar

Government Polytechnic Barh, Rana Bigha, Barh, India

Manoj Kumar

Electronics and Communication Engineering Department, B Pant Institute of Engineering and Technology, Pauri-Garhwal, Uttarakhand, India

Abstract

In this communication, we introduce a novel series-type lossy inductor simulator. The circuit consists of a single current feedback operational amplifier (CFOA), three resistors, and one capacitor. Control over the inductance can be achieved independently by adjusting a grounded resistor. Electronic control of the inductance is also possible by substituting the resistor with its MOS equivalents. The proposed circuit finds application in designing a lead compensator and low pass filter (LPF). To validate its functionality, a CMOS CFOA is utilized in the PSPICE simulator. Simulation results confirm the operation of the proposed circuits, closely matching theoretical predictions.

Issue

Vol. 168 No. A4(S) (2026): Special Issue: International Conference of Advance Research and Innovation

Section

Articles

Most read articles by the same author(s)

Monika Goyal, Garima, Jaydip Mehta, Tadi Chandrasekhar, Baluvuri Sudhakara Rao, Takveer Singh, Analytical Model for Studying Bulk Modulus Variation in Free Standing Nanostructures Based on Their Size and Shape , International Journal of Maritime Engineering: Vol. 168 No. A4(S) (2026): Special Issue: International Conference of Advance Research and Innovation
Narendra Mohan, Manoj Kumar, OFRD: Optimized Feature Reweighted DenseNet for Semantic Segmentation of Complex Indoor Scenes and Marine Applications , International Journal of Maritime Engineering: Vol. 168 No. A4(S) (2026): Special Issue: International Conference of Advance Research and Innovation
Narendra Mohan, Manoj Kumar, 3D Indoor Room Layout Estimation Using a Deep Learning–Driven ConvBi-LSTM Model for Marine and Maritime Applications , International Journal of Maritime Engineering: Vol. 168 No. A4(S) (2026): Special Issue: International Conference of Advance Research and Innovation

Submissions

To make a Submission to IJME, click here

Subscriptions

To Subscribe to IJME, Click Here for Subscription Options

Information

Join the Royal Institution of Naval Architects

The University of Buckingham Press is delighted to partner with RINA on the publication of IJME. RINA is a global membership body for the maritime industry and has Members in 140 countries. To see the options of becoming a Member at RINA, click here

UBP Journal Policies

Peer Review

Once articles are accepted to peer-review, all articles must be blind peer reviewed by at least two reviewers. Each reviewer will submit their review including comments and a recommendation when to accept for publication, reject or to request revisions to the articles.

Respect for Participants:

All Journals will treat all individuals involved in research with dignity and respect..

Informed Consent:

Authors must obtain and document informed consent from participants, ensuring they understand the research purpose, procedures, and potential risks.

Data Protection and Confidentiality:

See University of Buckingham’s Press’ Data Protection Policy.

Conflict of Interest Disclosure:

Authors are required to disclose any potential conflicts of interest, including financial or personal relationships that might influence their research or its interpretation.

Authorship and Attribution:

All individuals who made substantial contributions to the research must be acknowledged and those listed as authors must have approved the final text.

Data Integrity and Reporting:

Authors must accurately present their research findings, avoid fabrication or falsification of data, and provide sufficient detail for replication.

Plagiarism:

Journals should confirm they are using established plagiarism software, ensuring that submitted work is original and appropriately cites sources.

Ethical Approval:

For research involving human or animal subjects, it is required that confirmation that ethical approval was obtained from relevant institutional review boards or ethics committees.

Scientific Misconduct:

Any suspected scientific misconduct, such as fabrication, falsification, or plagiarism, must be immediately reported to the Publisher by emailing info@unibuckinghampress.com

Article Sidebar

Main Article Content

Abstract

Article Details

Most read articles by the same author(s)